srakaby.blogg.se - Galvanic isolator

GALVANIC ISOLATOR FULL
GALVANIC ISOLATOR PORTABLE
GALVANIC ISOLATOR SERIES

Set C: 45mA at 8.5VAlternative safety/entity parameters: Three sets of output terminals provide alternative power levels: Suitable for high integrity applications to SI元 according to IEC 61508 and IEC 61511. When enabled, a low input voltage always de-energizes the field device regardless of the input signal. Line short and open circuit fault detection is also reflected in the PLC/DCS control circuit.An override input, DIP switch selectable, is provided to permit a safety system to override the control signal. When a fault is detected, output is de-energized until normal condition is restored. It can also be used as a controlled supply to power measuring or process devices in a hazardous location.Short and open circuit diagnostic monitoring, DIP switch selectable and active when input power is present, provides LED indication and NC transistor output signalling. Typical applications include driving solenoid valves, audible and visual alarms. The D1048S is a single channel digital output galvanically isolated module enabling a safe area PLC/DCS to control a normally-energized device in a hazardous location…

GALVANIC ISOLATOR PORTABLE

Microprocessor models can be configured via software or pocket portable configuratorįor the latest in high integrity SIL solutions: check out the new D5000 Seriesĭigital Output, single channel, alternative power levels, PLC/DCS loop powered, extra control functions, SI元.

Removable PCB’s for power bus option and DIP switch configuration on multi-function models.Removable connectors for easy wiring and installation.

GALVANIC ISOLATOR SERIES

SIL ratings for safety related systems to IEC 61508 & 61511ĪLERT: Easily replace obsolete Elcon 1000 Series Isolators.

DNV for ships and offshore installations.

Other specific countries including Russia, Ukraine, Korea.

ATEX to CENELEC 94/9/EC for European Community.

Wide ambient operating temperature range.Īpprovals (check data for each specific model).

Optional power bus system for simplified wiring.

Plug-in terminal blocks for easy wiring.

Regular 35 mm “top hat” DIN rail mounting.

LED indication of power, signal, and line fault status.

DIP switch configuration for easy field set-up.

Single channel versions for high integrity applications.

Line fault detection for open or short circuits in field wiring.

Galvanic isolation provides ground-free intrinsic safety.

Three-port isolation eliminates noise and ground loop problems.

Select multi-function models are user configurable.

Wide choice of analog and digital I/O functions.

GALVANIC ISOLATOR FULL

Low heat dissipation over full working load range.Excellent signal transfer accuracy and repeatability.Up to 176 I/O channels per meter of DIN rail.Ultra slim 4-channel 22.5 mm wide DIN rail mounting modules.Innovative design with advanced surface mount components.The simplest and most cost effective way to implement Intrinsic Safety High Packing Density D1000 Series Intrinsically Safe Galvanic Isolators